I had all but given up on using exposure bracketing on my Fujifilm cameras. I would shoot the standard three frames, regular exposure, +1 and -1 and then use Lightroom’s merge to HDR to build a “High Def” image. Problem was that I could get the same result just taking the normal exposure and by moving the highlight and shadow sliders along with moving the white an black point sliders and get a result that was very similar to the HDR output. The dynamic range of the X-Trans sensors is pretty wide in raw. So why bother?
With newly released version 2.0 of the X-T2 firmware, you can set the camera to take up to 9 exposures to really build a much more “dynamic” image.
Here is how I had my camera set up to shoot the bracketed images.
On the Shooting menu, select drive settings.
Then select BKT Setting
Then BKT Select (Hard to see in my excellent screen captures…)
Once you select AE BKT you can go back one screen and set up the AE Bracket steps
Click on AE BKT
Then Frame/Step Settings. Note below you can set for continuous frames or 1 frame per click. You can also determine the order in which the exposures are made. I have it set to O normal exposure then plus exposures then minus exposures.
You can then select the number of frames to shoot.
And finally the number of steps between exposure. Note on the graphic below that the middle step is not right on 0 as the camera also takes into account any EV adjustments you have made. In my case I have (and usually have) a 2/3 minus EV dialed in.
And here you have the resulting 5 exposures. I think we start to have some captures that we can work with for building interesting HDR images.